| Capacity | kW | 200-700 |
| Fuel | Wood pellets 6...8mm | |
| Maximum fuel consumption | kg/h | 146 |
| Power output at heat up | kW | 50 |
| Power output holding flame | kW | 12 |
| Minimum boiler furnance diameter required | mm | 700 |
| Minimum boiler furnace lenght required | mm | 2200 |
| Maximum flue gas amount (at 200C) | m³/h | 1800 |
| Optimal O2 concentration | % | 4...6 |
| Required chimney diameter with flue gas fan | mm | ≥ 300 |
| Power consumption during ignition | W | 800 |
| Power consumption at standby | W | 20 |
| Power supply | 3x400VAC. 6A | |
| Overall dimensions (LxWxH) | mm | 1203x750x600 |
| Burning chamber dimensions (LxWxH) | mm | 600x528x457 |
| Pellet inlet diameter | mm | 76 |
| Burner weight | kg | 165 |
Pellet auger is a device that transports pellets from silo to the burner according to the fuel amount needed. Burner controls the auger, calculates the fuel amount (using an internal feeder and fuel level sensors) and gives the command to the auger on a right moment to start or stop. We produce pellet augers with a length starting of 1,5 m and by request we can deliver an auger up to 9m. Our standard solutions of augers are up to 6m.
To choose the right auger, please look at the table below.
| Product | Auger length | Suitable for the burners | Tube material | Spiral diameter | Motor power | Reducer |
|---|---|---|---|---|---|---|
| PA6014 | 6 m | 100/ 180/ 250 kW | plastic | 60 mm | 140 W | 1:60 |
| PA4060 | 4 m | 50/ 100/ 180/ 250 kW | plastic | 60 mm | 60 W | 1:60 |
| PA4037 | 4 m | 350/ 500/ 700 kW | plastic | 60 mm | 370 W | 1:28 |
| PA6037 | 6 m | 250/ 350/500/700 kW | plastic | 60 mm | 370 W | 1:28 |
| PA4055 | 4 m | 700/ 1000 kW | plastic | 60 mm | 550 W | 1:20 |
| PA6055 | 6 m | 700/ 1000 kW | plastic | 60 mm | 550 W | 1:20 |
| PA4075 | 4 m | 1000/ 1500 kW | plastic | 60 mm | 750 W | 1:10 |
| PA6075 | 6 m | 1000/ 1500 kW | plastic | 60 mm | 750 W | 1:10 |
Most of the electronics in our product catalog are developed in the house, with the aim to offer our customers a higher of comfort level when using our burners and boilers. Wired or wireless temperature sensors and internet modules give the opportunity to control your home heating level in your smartphone any time needed. Same type of sensors can be used in industrial processes where stable temperature is with critical importance. With different controllers, sensors and modules we have solved hundreds of demands in all kind of appliances (steam production, milk pasteurization, tea drying etc).
| Product category | Description |
|---|---|
| INTERNET MODULES | Internet module for the burner |
| Internet module for the boiler | |
| Wifi module for the burner | |
| Wifi module for the boiler | |
| SENSORS | Wired and wireless temperature sensors for room and outdoor temperature measuring |
| Boiler temperature sensors 3 - 15m | |
| Oxygen sensors (Lambda sensors) to connect with the burner and with the boiler | |
| Flue gas temperature sensors |
| Fan type | Suitability |
|---|---|
| MF0050 | PV20 /30 /50 |
| KK 6-6,8 | PV100 |
| KK 7-12,5 | PV100/ 180 |
| KK 8-18 | PV180/ 250 |
| KK 8-32 | PV350 |
| KK 9-33 | PV500/ 700 |
| KK 10-65 | PV1000 |
| KK 11-80 | PV1000/ 1500 |
| KK 13-150 | PV1000/ 1500 |
To ensure the cleanest flue gases and to catch all possible fine particles, we provide ash cyclones for our burners starting from 250kW.
Ash cyclones for following burners:
- PV250/ PV350
- PV500
- PV700
- PV1000
- PV1500